This item will give you everything needed to build a kWeld unit. Complete the kit using basic tools, Kit inclusions are listed below . The kit is supplied with cables assembled.
Please note these are the complete setups with options for with laser cut housings on without.
Contains the following,
Kweld complete Battery Spot welder Cables assembled
HP Power supply
Cable to connect Ksupply to Kcap 400mm long with XT150 connectors (easy disconnect)
With an option to order the Laser Cut Housings for Kweld and Kcap.
The assembly and operating manuals are available on this website for download (https://www.keenlab.de/wp-content/uploads/2018/07/kWeld-assembly-manual-r5.0.pdf – https://www.keenlab.de/wp-content/uploads/2018/07/kWeld-operation-manual-r3.0.pdf). Please make sure to study them carefully in order to ensure safe and reliable operation.
|Electronics||This is the brain of the kWeld battery spot welder. You purchase a professionally reflow soldered, tested and programmed electronic module. See https://www.keenlab.de/index.php/product/kweld-electronics/ for more details.|
|Cables, electrode holders, and electrodes||All bits and pieces that are required to fully assemble the kWeld cabling, including a pair of electrode holders and a pair of electrodes. (See https://www.keenlab.de/index.php/product/kweld-cable-electrode-holders/ and https://www.keenlab.de/index.php/product/kweld-electrode-set/ for details.) The power input connection consists of loose cable ends, you need to add a connector that matches your power source. Suitable XT150 power connectors are available in the shop.
Choose the supplied loose option if you have the time and tools do do the necessary assembly steps yourself, saving some money. Check out the assembly manual for an overview of the involved work. If you are in doubt, choose the assembled option here.
|Fuse||A 300A high current fuse (type ANL) that needs to be mounted on the kWeld electronic module and protects the system from the consequences of unlikely catastrophic failures.|
|Foot switch||The pulse trigger switch of the kWeld system. It has a rugged construction, and uses a real micro switch that is also easy to service. The cable length is 2.0m.|
|CNC machined bus bars||These need to be bolted to the electronics module and provide a low impedance path between the switch transistors and the cable system.|
|Mechanical parts||All bits and pieces that are required to fully assemble the kWeld electronics module with the LCD, the cabling, the fuse, and the bus bars. See https://www.keenlab.de/index.php/product/kweld-mechanical-parts/ for more details.|